Specification register
125 values from 70 items and 8 product groups, filterable and searchable. With the test method, because a value without a method cannot be compared.
125 of 125 values
| Item | Property | Unit | Value | Test method | Supply |
|---|---|---|---|---|---|
| Passenger car engine oilsPCMO · SAE 0W-20 to 10W-40 | Viscosity grades | SAE 0W-20, 5W-30, 5W-40, 10W-40 | SAE J300 | Stock and contract | |
| Passenger car engine oilsPCMO · SAE 0W-20 to 10W-40 | Sulphated ash (ACEA C3) | % | < 0.8 | Stock and contract | |
| Passenger car engine oilsPCMO · SAE 0W-20 to 10W-40 | HTHS viscosity (ACEA C3) | mPa·s | min. 3.5 | Stock and contract | |
| Passenger car engine oilsPCMO · SAE 0W-20 to 10W-40 | LSPI test | included in API SN Plus / SP | Stock and contract | ||
| Commercial vehicle engine oilsHDDO · SAE 10W-30, 15W-40, 5W-30 | Viscosity grades | SAE 10W-30, 15W-40, 5W-30 | SAE J300 | Stock and contract | |
| Commercial vehicle engine oilsHDDO · SAE 10W-30, 15W-40, 5W-30 | Exhaust aftertreatment | DPF and SCR compatible (low SAPS) | Stock and contract | ||
| Gear oilsAPI GL-5 · SAE 75W-90, 80W-90, 85W-140 | Viscosity grades | SAE 75W-90, 80W-90, 85W-140 | SAE J306 | Stock and contract | |
| Gear oilsAPI GL-5 · SAE 75W-90, 80W-90, 85W-140 | EP additive level GL-5 | % | up to 6.5 | Stock and contract | |
| Gear oilsAPI GL-5 · SAE 75W-90, 80W-90, 85W-140 | EP additive level GL-4 | % | up to 4.0 | Stock and contract | |
| Hydraulic oilsHLP · ISO VG 32 / 46 / 68 | Viscosity VG 32 at 40 °C | mm²/s | ≈ 32.05 | ASTM D445 | Stock and contract |
| Hydraulic oilsHLP · ISO VG 32 / 46 / 68 | Viscosity VG 46 at 40 °C | mm²/s | ≈ 45.92 | ASTM D445 | Stock and contract |
| Hydraulic oilsHLP · ISO VG 32 / 46 / 68 | Viscosity VG 68 at 40 °C | mm²/s | ≈ 68.08 | ASTM D445 | Stock and contract |
| Hydraulic oilsHLP · ISO VG 32 / 46 / 68 | Flash point VG 32 / 46 / 68 | °C | ≈ 236 / 240 / 248 | ASTM D92 (COC) | Stock and contract |
| Hydraulic oilsHLP · ISO VG 32 / 46 / 68 | Pour point VG 32 / 46 / 68 | °C | ≈ -9 / -9 / -6 | ASTM D97 | Stock and contract |
| Industrial gear oilsCLP · ISO VG 68 to 460 | Viscosity grades | ISO VG 68, 100, 150, 220, 320, 460 | Stock and contract | ||
| GreasesNLGI 000 to 6 · lithium and lithium complex | Consistency grades | NLGI 000 to 6 | Stock and contract | ||
| GreasesNLGI 000 to 6 · lithium and lithium complex | Dropping point, lithium complex | °C | 260 to 280 | Stock and contract | |
| GreasesNLGI 000 to 6 · lithium and lithium complex | Continuous service temperature, lithium complex | °C | 150 to 170 | Stock and contract | |
| Marine oilsCylinder oil BN 24 to 100 · TPEO BN 10 to 55 | Cylinder oil BN levels | 24, 30, 40, 50, 70, 100 | Contract | ||
| Marine oilsCylinder oil BN 24 to 100 · TPEO BN 10 to 55 | System oil (TPEO) BN | approx. 10 to 55 | Contract | ||
| Marine oilsCylinder oil BN 24 to 100 · TPEO BN 10 to 55 | Viscosity grades | SAE 30, 40, 50 | Contract | ||
| Group I, Solvent NeutralSN 150 · SN 500 · SN 650 · BS 150 | Saturates | % | < 90 | API 1509 Annex E | Stock and contract |
| Group I, Solvent NeutralSN 150 · SN 500 · SN 650 · BS 150 | Sulphur content | % | > 0.03 | Stock and contract | |
| Group I, Solvent NeutralSN 150 · SN 500 · SN 650 · BS 150 | Viscosity index | 80 to 120 | ASTM D2270 | Stock and contract | |
| Group I, Solvent NeutralSN 150 · SN 500 · SN 650 · BS 150 | SN 150 | low viscosity, e.g. hydraulic oils | Stock and contract | ||
| Group I, Solvent NeutralSN 150 · SN 500 · SN 650 · BS 150 | SN 500 | higher viscosity, engine and gear oils | Stock and contract | ||
| Group I, Solvent NeutralSN 150 · SN 500 · SN 650 · BS 150 | SN 650 | high viscosity | Stock and contract | ||
| Group I, Solvent NeutralSN 150 · SN 500 · SN 650 · BS 150 | BS 150 (bright stock) | very viscous residue, cylinder and heavy duty oils | Stock and contract | ||
| Group IIN 70 · N 150 · N 500 · N 600 | Saturates | % | ≥ 90 | API 1509 Annex E | Stock and contract |
| Group IIN 70 · N 150 · N 500 · N 600 | Sulphur content | % | ≤ 0.03 | Stock and contract | |
| Group IIN 70 · N 150 · N 500 · N 600 | Viscosity index | 80 to 120 | ASTM D2270 | Stock and contract | |
| Group III4 cSt · 6 cSt · 8 cSt | Saturates | % | ≥ 90 | API 1509 Annex E | Stock and contract |
| Group III4 cSt · 6 cSt · 8 cSt | Sulphur content | % | ≤ 0.03 | Stock and contract | |
| Group III4 cSt · 6 cSt · 8 cSt | Viscosity index | ≥ 120 | ASTM D2270 | Stock and contract | |
| Group III4 cSt · 6 cSt · 8 cSt | Trade grades | 4, 6 and 8 cSt at 100 °C | ASTM D445 | Stock and contract | |
| PAO (Group IV)PAO 4 · PAO 6 · PAO 8 | Trade grades | 4, 6 and 8 cSt at 100 °C | ASTM D445 | Contract | |
| PAO (Group IV)PAO 4 · PAO 6 · PAO 8 | Manufacture | Oligomerisation of 1-decene / 1-dodecene | Contract | ||
| DI packages (detergent inhibitor)PCMO · HDDO · Gear · Hydraulic · Grease | Typical treat rate | % | 5 to 15 (guide value, depends on target specification) | Contract | |
| DI packages (detergent inhibitor)PCMO · HDDO · Gear · Hydraulic · Grease | Families | PCMO, HDDO, Gear, Hydraulic, Grease | Contract | ||
| VI improversOCP · PMA | Typical treat rate | wt % | approx. 5 to 12 | Contract | |
| Pour point depressants (PPD) | Typical treat rate | wt % | a few tenths up to approx. 1 (guide value) | Contract | |
| Antioxidants | Typical treat rate | ppm to low percent range (guide value) | Contract | ||
| Dispersants (PIB succinimides) | PIB molar mass | g/mol | approx. 1,000 to 2,000 | Contract | |
| ZDDP and antiwear agentsZinc dialkyl dithiophosphate | Example formulation | ≈ 0.35 wt % ZDDP gives ≈ 250 ppm phosphorus (guide value) | Contract | ||
| ZDDP and antiwear agentsZinc dialkyl dithiophosphate | Dual function | antiwear and antioxidant | Contract | ||
| EP additives (extreme pressure) | Level GL-4 | % | up to 4.0 | Contract | |
| EP additives (extreme pressure) | Level GL-5 | % | up to 6.5 | Contract | |
| Antifoams | Typical treat rate | ppm range (guide value) | Contract | ||
| Urea prilled 46 %Urea Prilled 46 % N | Nitrogen (N) | % | min. 46.0 | Contract | |
| Urea prilled 46 %Urea Prilled 46 % N | Moisture | % | max. 0.5 | Contract | |
| Urea prilled 46 %Urea Prilled 46 % N | Biuret | % | max. 1.0 | Contract | |
| Urea prilled 46 %Urea Prilled 46 % N | Particle size | mm | 1 to 2.8 (min. 90 %) | Contract | |
| Urea prilled 46 %Urea Prilled 46 % N | Free ammonia | ppm | max. 160 | Contract | |
| Urea prilled 46 %Urea Prilled 46 % N | pH (10 % solution) | 7.0 to 9.0 | Contract | ||
| Urea granular 46 %Urea Granular 46 % N | Nitrogen (N) | % | min. 46.0 | Contract | |
| Urea granular 46 %Urea Granular 46 % N | Moisture | % | max. 0.5 | Contract | |
| Urea granular 46 %Urea Granular 46 % N | Biuret | % | max. 0.90 | Contract | |
| Urea granular 46 %Urea Granular 46 % N | Particle size | mm | 2 to 4 (90 to 94 % min.) | Contract | |
| AdBlue / DEFUrea solution 32.5 % to ISO 22241 | Urea content | % | 31.8 to 33.2 (target 32.5) | ISO 22241 | Stock and contract |
| AdBlue / DEFUrea solution 32.5 % to ISO 22241 | Biuret | % | ≤ 0.3 | Stock and contract | |
| AdBlue / DEFUrea solution 32.5 % to ISO 22241 | Aldehydes | mg/kg | ≤ 5 | Stock and contract | |
| AdBlue / DEFUrea solution 32.5 % to ISO 22241 | Metal content, each metal | mg/kg | ≤ 0.5 | Stock and contract | |
| AdBlue / DEFUrea solution 32.5 % to ISO 22241 | Density at 20 °C | g/cm³ | 1.087 to 1.093 | Stock and contract | |
| UAN solution32 % N (also 30 % and 28 %) | Standard concentration | % N | 32 (also 30 and 28) | Contract | |
| UAN solution32 % N (also 30 % and 28 %) | Composition (guide value) | approx. 45 % ammonium nitrate, 35 % urea, 20 % water | Contract | ||
| Ammonium sulphate21-0-0 | Nutrient analysis | 21-0-0 | Contract | ||
| Ammonium sulphate21-0-0 | Forms | crystalline, granulated | Contract | ||
| DAP (diammonium phosphate)18-46-0 | Nutrient analysis | 18-46-0 | Contract | ||
| MAP (monoammonium phosphate)11-52-0 | Nutrient analysis | 11-52-0 | Contract | ||
| NPK compound fertiliserspecific to each project, e.g. 15-15-15 or 20-10-10 | Analysis | per customer recipe, no fixed standard | Contract | ||
| MOP (potassium chloride)0-0-60 | Nutrient analysis | 0-0-60 (KCl) | Contract | ||
| SOP (potassium sulphate)0-0-50 | Nutrient analysis | 0-0-50 (K₂SO₄), free of chloride | Contract | ||
| Gasoil EN 59010 ppm sulphur | Sulphur content | mg/kg | max. 10 | Contract | |
| Gasoil EN 59010 ppm sulphur | Cetane number | min. 51 | EN ISO 5165 | Contract | |
| Gasoil EN 59010 ppm sulphur | Density at 15 °C | kg/m³ | 820 to 845 | EN ISO 12185 | Contract |
| Gasoil EN 59010 ppm sulphur | Flash point | °C | min. 55 | EN ISO 2719 | Contract |
| Gasoil EN 59010 ppm sulphur | Viscosity at 40 °C | mm²/s | 2.0 to 4.5 | EN ISO 3104 | Contract |
| Gasoil EN 59010 ppm sulphur | Water content | mg/kg | max. 200 | EN ISO 12937 | Contract |
| Jet A-1DEF STAN 91-091 / ASTM D1655 | Flash point | °C | min. 38 | ASTM D56 | Contract |
| Jet A-1DEF STAN 91-091 / ASTM D1655 | Freezing point | °C | max. -47 | ASTM D2386 | Contract |
| Jet A-1DEF STAN 91-091 / ASTM D1655 | Conductivity requirement | required in DEF STAN 91-091 | Contract | ||
| Heavy fuel oil 380 cStISO 8217 RMG 380 · HSFO | Viscosity at 50 °C | cSt | max. 380 | ISO 3104 | Contract |
| Heavy fuel oil 380 cStISO 8217 RMG 380 · HSFO | Sulphur | % | up to 3.5 (permitted only with scrubber) | Contract | |
| Heavy fuel oil 380 cStISO 8217 RMG 380 · HSFO | Also tested | density, water, sediment, cat fines, CCAI | Contract | ||
| VLSFO / LSFOmax. 0.50 % sulphur (IMO 2020) | Sulphur | % m/m | max. 0.50 | Contract | |
| VLSFO / LSFOmax. 0.50 % sulphur (IMO 2020) | Tested properties | sulphur, viscosity, density, flash point, water, sediment, cat fines, CCAI | Contract | ||
| NaphthaSteam cracker and reformer feed | Boiling range | °C | approx. 30 to 200 | Contract | |
| NaphthaSteam cracker and reformer feed | Paraffin content (CFR Japan) | % | min. 65 | Contract | |
| LPG (propane and butane)EN 589 · HD-5 · Commercial Butane | Export propane | % | max. 2 ethane | Contract | |
| LPG (propane and butane)EN 589 · HD-5 · Commercial Butane | Commercial butane | vol % | min. 95 n-butane | Contract | |
| Bitumen 60/70Penetration grade | Penetration at 25 °C | 0.1 mm | 60 to 70 | ASTM D5 | Contract |
| Bitumen 60/70Penetration grade | Softening point (ring and ball) | °C | 49 to 56 | ASTM D36 | Contract |
| Bitumen 80/100Penetration grade | Penetration at 25 °C | 0.1 mm | 80 to 100 | ASTM D5 | Contract |
| Bitumen 80/100Penetration grade | Softening point (ring and ball) | °C | 45 to 52 | ASTM D36 | Contract |
| MethanolIMPCA reference specification | Purity | % w/w | min. 99.85 | Contract | |
| MethanolIMPCA reference specification | Water content | % w/w | max. 0.100 | Contract | |
| MethanolIMPCA reference specification | Ethanol | % w/w | max. 0.0050 | Contract | |
| MethanolIMPCA reference specification | Acetone | % | max. 0.0030 | Contract | |
| MethanolIMPCA reference specification | Permanganate time at 15 °C | min | min. 60 | Contract | |
| MethanolIMPCA reference specification | Iron, total | mg/kg | max. 0.10 | Contract | |
| MethanolIMPCA reference specification | Chloride | mg/kg | max. 0.5 | Contract | |
| MEG (monoethylene glycol)Fibre grade | Purity (fibre grade) | % | min. 99.5 | Contract | |
| TolueneCommercial · Nitration · Industrial | Commercial / trade grade | % | min. 99.5 | Contract | |
| TolueneCommercial · Nitration · Industrial | Nitration / reagent grade | % | ≥ 99.8 | Contract | |
| TolueneCommercial · Nitration · Industrial | Industrial grade | % | ≥ 94 (up to 5 % xylene) | Contract | |
| XyleneMixed xylene · para-xylene | Commercial mixed xylene | % | min. 97 isomers | Contract | |
| XyleneMixed xylene · para-xylene | Ethylbenzene | % | max. 3 | Contract | |
| XyleneMixed xylene · para-xylene | Benzene / toluene | % | max. 0.1 | Contract | |
| XyleneMixed xylene · para-xylene | Para-xylene | % | ≈ 99.5 | Contract | |
| BenzenePetrochemical feedstock | Customary minimum purity | % | 99.9 | Contract | |
| Sulphurgranulated · lump | Purity (industrial quality) | % | typically 99.5 | Contract | |
| Sulphurgranulated · lump | Granule size | mm | approx. 2 to 6 | Contract | |
| Polypropylene (PP)Homopolymer · block copolymer · random | Block copolymer, ethylene content | % | 5 to 15 | Contract | |
| Polypropylene (PP)Homopolymer · block copolymer · random | Random copolymer, ethylene content | % | 1 to 7 | Contract | |
| Caustic sodaFlakes · pearls · 50 % lye | Flakes / pearls | % | NaOH 98 to 99 | Stock and contract | |
| Caustic sodaFlakes · pearls · 50 % lye | Lye | % | 50 (standard trade product) | Stock and contract | |
| Soda ashlight · dense | Purity | % | approx. 98 to 99 | Stock and contract | |
| Sulphuric acidtechnical 98 % | Technical concentration | % | mostly 98 (also 96) | Contract | |
| Hydrochloric acidtechnical 30 to 33 % | Technical concentration | % | approx. 30 to 33 | Contract | |
| Hydrogen peroxide35 % · 50 % | Trade concentrations | % | 35 and 50 (special 60 / 70) | Contract | |
| Calcium carbonateTechnical · food · pharma | Purity | % | often ≥ 99 | Stock and contract | |
| GlycerineUSP 99.5 % · technical | USP purity | % | min. 99.5 | Stock and contract | |
| GlycerineUSP 99.5 % · technical | Heavy metals (USP) | ppm | < 5 | Stock and contract | |
| SolventsAcetone · IPA · MEK | Acetone, technical | % | min. 99.5 | Stock and contract | |
| SolventsAcetone · IPA · MEK | IPA | % | technical up to 99.99 | Stock and contract |
Typical values, not a specification commitment. The batch analysis (COA) is binding. Some items have no general table, because water treatment and oilfield chemistry are designed for each application.
Why methods are listed here
Two data sheets can state the same figure and still describe different goods if different test methods lie behind them. A flash point by open cup regularly lies above one by closed cup. That is why the method has its own column here and is not left to the small print.
Just as important is the difference between typical values and a batch analysis. Typical values describe what a product usually delivers. Only the certificate of analysis of the delivered batch is binding, issued by the plant and, where required, confirmed by an independent inspection company.
Some standards are revised periodically. ACEA sequences appear in annual versions and API categories are updated, so the version named in the contract applies.
Enquire about an item
Give us the product, quantity, delivery term and destination port. We settle everything else by phone.